Mosaic Home Interiors


  Terralma
Colors in this series

45TERARI314 Arizona
(Natural)
45TERBOR314 Bora Bora
(Natural)
45TERJAL314 Jalapao
(Natural)
45TERMAN314 Mandacaru
(Natural)
45TERNOR314 Noronha
(Natural)
45TERRIV314 Riviera
(Natural)
45TERSAR314 Sardenha
(Natural)
45TERSER314 Serido
(Natural)
Size and Deco Options
Some options are available via Special Order only

1/2" x 3"
Arizona 45TERARI12S
(Natural)
1/2" x 3"
Arizona 45TERARI12T
(Natural)
3" x 14"
Arizona 45TERARI314
(Natural)
1/2" x 3"
Bora Bora 45TERBOR12S
(Natural)
1/2" x 3"
Bora Bora 45TERBOR12T
(Natural)
3" x 14"
Bora Bora 45TERBOR314
(Natural)
1/2" x 3"
Jalapao 45TERJAL12S
(Natural)
1/2" x 3"
Jalapao 45TERJAL12T
(Natural)
3" x 14"
Jalapao 45TERJAL314
(Natural)
1/2" x 3"
Mandacaru 45TERMAN12S
(Natural)
1/2" x 3"
Mandacaru 45TERMAN12T
(Natural)
3" x 14"
Mandacaru 45TERMAN314
(Natural)
1" x 6"
Mandacaru + Arizona 45TERMANARI16C
(Natural)
1" x 6"
Mandacaru + Serido 45TERMANSER16C
(Natural)
1/2" x 3"
Noronha 45TERNOR12S
(Natural)
1/2" x 3"
Noronha 45TERNOR12T
(Natural)
1" x 4"
Noronha, Arizona + Sardenha 45TERNOR14B
(Natural)
3" x 14"
Noronha 45TERNOR314
(Natural)
1" x 6"
Noronha + Bora Bora 45TERNORBOR16C
(Natural)
1/2" x 3"
Riviera 45TERRIV12S
(Natural)
1/2" x 3"
Riviera 45TERRIV12T
(Natural)
1" x 4"
Riviera, Jalapao + Sardenha 45TERRIV14B
(Natural)
3" x 14"
Riviera 45TERRIV314
(Natural)
1/2" x 3"
Sardenha 45TERSAR12S
(Natural)
1/2" x 3"
Sardenha 45TERSAR12T
(Natural)
1" x 4"
Sardenha, Noronha, Jalapao + Bora Bora 45TERSAR14B
(Natural)
3" x 14"
Sardenha 45TERSAR314
(Natural)
1/2" x 3"
Serido 45TERSER12S
(Natural)
1/2" x 3"
Serido 45TERSER12T
(Natural)
3" x 14"
Serido 45TERSER314
(Natural)
1" x 6"
Serido + Noronha 45TERSERNOR16C
(Natural)
Series: Terralma
Composition: Glazed Ceramic
Shade Variation: LOW?
shade variation rating chart

Shade Variation Rating: LOW

Differences among pieces from the same production run are minimal.”
Look: Transitional
Country: Brazil
Stocked: Domestic:
2 week ETA?

Stock Status:

This product is stocked in the US, and will deliver in approximately 2 weeks.
Surface Rating: Wall Only ?

Surface Rating: Wall Only
COF: DCOF ≥ .42?

What is COF?

Coefficient of friction (COF) is the measurement of a tile's frictional resistance, closely related to traction and slipperiness. Both static and dynamic measurements can be taken. Static coefficient of friction (SCOF) is the frictional resistance one pushes against when starting in motion. Dynamic coefficient of friction (DCOF) is the frictional resistance one pushes against when already in motion. For SCOF and DCOF, a slip occurs when pushing off with more force than the surface can resist. That can happen when the angle of the force changes (e.g., pushing off harder while pressing down less) or when the floor surface becomes more slippery than anticipated.

While many tile products still show a "COF" value, many manufacturers have stopped reporting coefficient of friction per the ASTM C1028 method because the standard for tile floors has changed. There is now a >0.42 requirement, measured per the DCOF AcuTest℠, for level interior tiles that will be walked on when wet.

Read more about static and dynamic coefficients of friction and the DCOF AcuTest here.
Sizes listed are approximate. Actual sizes with acceptable variances may be listed in the brochure.

Shade Variation may vary by color.
 
The concept of sustainability and "green" building practices has caused significant changes within the commercial and residential construction industry over the past decade. Building green is more than just an environmental buzzword though. In the end, the consumer also benefits from sustainability through less frequent maintenance needs and greater energy efficiency, resulting in lower costs over the life of a building, as well as a healthier indoor environment. When it comes to energy efficiency, durability and other green qualities, ceramic tile is unrivaled as an environmentally-friendly flooring material.

The Advantages of Tile
  • Tile is not an original source of contaminants.
  • Tile does not compromise IAQ during initial installation.
  • Tile will not act as a "sink" to absorb VOCs or other chemicals from surrounding materials. After tile is installed, it forms a completely inert flooring system.
  • Tile will not support bacterial or fungal growth, nor will it absorb or release other contaminants.
  • Tile offers ease of maintenance with simple, water-based cleaning materials.
  • Tile does not require solvent-based cleaners or sealers. Simple, water-based products keep tile well maintained and also protects our environment. Thus, tile offers significant advantages for indoor air quality during installation and for the lifetime of the tile’s use in the building.

  • 1/2" x 14" Natural Liner

Trim pieces may vary by color, please select a tile or view the Brochure for trim details.

For detailed information on trim pieces, click here.

Terralma Brochure

Warranty

Care + Maintenance

Design Center: M - F: 8:00 am - 5:00 pm     •     Sales Counter & Warehouse: M - F: 7:30 am - 4:30 pm
Customer Service Representatives available M - F 8:00 am - 5:00 pm EST
800.828.9265 option 4.
Design Centers M - F: 8:00 am - 5:00 pm
Sales Counter / Warehouse M - F: 7:30 am - 4:30 pm
Customer Service Representatives
available M - F 8:00 am - 5:00 pm EST
800.828.9265 option 4